Assembly InstructionsUpdated 2 months ago

Here you will find all the instructions for assembling your KeySmart Loop:

1. Open the box and remove the KeySmart Loop from the tray. Place it on a flat surface.

2. Loosen the single screw on the KeySmart Loop using a penny, quarter, or flathead screwdriver. Avoid using sharp objects, as they may damage the screw’s finish.

3. Lift the top side of the KeySmart Loop and set the included spacers aside.

4. Place your keys onto the KeySmart Loop. The KeySmart Loop can hold up to 5 standard house keys. Please note that larger keys may take up more than one key slot.

• Tip: If you are adding more than 3 keys, you can stack them above the height of the post and guide the screw through the keyholes to secure them properly.
• Note: Large car keys with rubber heads may not fit over the post without modification. Use the included carabiner to attach your car fob or any larger keys that do not fit inside the KeySmart Loop.

5. If you are using fewer than 5 keys, add the included spacers above your keys to ensure a secure and snug fit.

6. Press the top side back down over the keys and spacers.

7. Reinsert and tighten the screw to secure everything in place.

• Tip: The screw features locking ridges designed to prevent loosening. Stop turning after the first two “clicks” to avoid over-tightening, which may damage your KeySmart Loop.

If you have any questions or need additional assistance, please feel free to contact our support team.